IAENG International Conference on Industrial Engineering (ICINDE'18)

 
  Hong Kong, 14-16 March, 2018  
     
 
Conferences Publications Membership About IAENG FAQ Contact Us
 
     
 
The IAENG International Conference on Industrial Engineering (ICINDE'18) will take place in Hong Kong, 14-16 March, 2018.
 
     
 

The conference ICINDE'18 is held under the International MultiConference of Engineers and Computer Scientists 2018. The IMECS 2018 is organized by the International Association of Engineers (IAENG), a non-profit international association for the engineers and the computer scientists. The IMECS conferences serve as good platforms for our members and the entire engineering community to meet with each other and to exchange ideas. Our IMECS committees have been formed with over three hundred conference committees members who are mainly research center heads, faculty deans, department heads, professors, and research scientists from over 30 countries. The last IAENG conference has attracted more than eight hundred participants from over 50 countries. All submitted papers will be under peer review and accepted papers will be published in the conference proceeding (ISBN: 978-988-14047-8-7). The abstracts will be indexed and available at major academic databases. The accepted papers will also be considered for publication in the special issues of the journal Engineering Letters, in IAENG journals and in edited books.

 
     
  Calls for Manuscript Submissions new  
     
  Important Dates:  
  Draft Manuscript Submission Deadline (extended): 8 January, 2018  
  Camera-Ready Papers Due & Registration Deadline (extended): 30 January, 2018  
  IMECS 2018: 14-16 March, 2018  
     
 

The topics of the ICINDE'18 include, but not limited to, the following:

 
     
 

Engineering Physiology

Biomedical Instrumentation

Engineering Statistics

Quality Management Systems

Maintenance Engineering

Reliability and Quality Control

Engineering Experimental Design

Integrated Product Engineering

Engineering Risk and Decision Analysis

Computer Supported Collaborative Engineering

Human Factors and Ergonomics

 

Computer-Aided Design

Computer Aided Manufacturing

Computer Simulation Methods

Facilities Design and Logistics

Manufacturing Processes and Methods

Information Systems for the Manufacturing

Quality and Productivity Management

Optimization Methods

Intelligent Engineering Systems

Engineering Management and Leadership

 
 

 

ICINDE Conference Co-Chairs and Committee Members:

Prof. Basim Al-Najjar
Professor of Terotechnology (Systemekonomi)
Chairman of the Centre of Industrial Competitiveness (CIC)
School of Technology and Design, Vaxjo University, Sweden

Dr. N. Alagumurthi
Assistant Professor, Department of Mechanical Engineering, Pondicherry Engineering College, India

Prof. Ali Allahverdi
Professor, Department of Industrial and Management Systems Eng.,
Kuwait University, Kuwait

Dr. Alireza Amini
Inspector, NIC Technical Inspection Company, Iran

Dr. Ioannis Angeli
Lecturer, Department of Mechanical Engineering & Materials Science and Engineering, Cyprus University of Technology, Cyprus

Prof. Koray Altun
Assistant Professor, Department of Industrial Engineering, Bursa Technical University, Turkey

Prof. Mustafa Batuhan Ayhan
Assistant Professor, Department of Industrial Engineering, Marmara University, Turkey

Dr. Amir Azizi
Senior lecturer, Faculty of Manufacturing Engineering, Univeristi Malaysia Pahang, Malaysia

Prof. Bipradas Bairagi
Assistant Professor, Department of Production Engineering, Haldia Institute of Technology, India

Dr. Chan Ching-Yuen
Lecturer, Department of Industrial & Systems Engineering
The Hong Kong Polytechnic University, Hong Kong

Dr. Danny SK Chan (co-chair)
Lecturer, Department of Industrial and Systems Engineering
The Hong Kong Polytechnic University, Hong Kong

Dr. Alan Hoi-shou Chan (co-chair)
Associate Professor, Department of Systems Engineering and Engineering Management
President of the Hong Kong Ergonomics Society (2003-2005)
City University of Hong Kong, Hong Kong

Dr. Qi Chao
Research scientist, Singapore-MIT Alliance, Nanyang Technological University, Singapore

Dr. Tsung-Hui Chen
Head, Department of Marketing and Distribution Management, National Pingtung University, Taiwan

Dr. Yee-Ming Chen
Associate Professor, Dept. of Industrial Engineering
Yuan Ze University, Taiwan

Dr. Shanbao Cheng
Research Scientist, Direct Drive System @ FMC Technologies, Irvine, California, USA

Dr. Kong Bieng Chuah (session chair of the organization learning)
Associate Professor, Department of Systems Engineering and Engineering Management
City University of Hong Kong, Hong Kong

Prof. Kourosh Eshghi
Professor, Industrial Engineering Department, Sharif University of Technology, Iran

Prof. Gang (Gary) Feng
Associate Provost and Chair Professor of Mechatronic Engineering
Department of Mechanical and Biomedical Engineering
City University of Hong Kong, Hong Kong
Associate editor, IEEE Trans. on Fuzzy Systems

Prof. A. Goswami
Professor, Department of Mathematics, Indian Institute of Technology, India

Prof. Heung Suk Hwang (co-chair)
Chair Professor, Department of Port & Logistics System, College of Port & Logistics, TongMyong University, South Korea
Former President of Korea Institute of Industrial Engineering, KIIE, and
The Editor-in-Chief of International Journal of Industrial Engineering and Management Systems

Dr. Ralph W.L. IP
Executive Director of Fong’s Research Centre for Advanced Mechanical Systems,
Honorary Associate Professor in the Department of Mechanical Engineering,
University of Hong Kong, Hong Kong

Prof. Shigekazu Ishihara
Department of Kansei Design, Faculty of Psychological Science
Hiroshima International University, Japan

Dr. Ajai Jain
Assistant Professor, Mechanical Engineering Department, National Institute of Technology, India

Prof. Limin Jia
Chair Professor, School of Traffic and Transportation,
Beijing Jiaotong University, China

Dr. Voratas Kachitvichyanukul
Associate Professor, Industrial Engineering & Management,
School of Engineering and Technology, Asian Institute of Technology, THAILAND

Dr. Nima Kazemi
Research Assistant, Center for Product Design and Manufacturing, University of Malaya, Malaysia

Dr. Ibrahim Kucukkoc
Reserach Assistant, Department of Industrial Engineering, Balikesir University, Turkey

Dr. Wen-Hung Kuo (co-chair)
Associate Professor, Department of Information Management
National Formosa University, Taiwan

Prof. Ho Woo Lee
Professor of Industrial Engineering and Systems Management Engineering, Sungkyunkwan University, South Korea

Dr. Yun-Chia Liang
Associate Professor, Department of Industrial Engineering & Management, Yuan Ze University, Taiwan

Dr. Chuar-yuan Lin
Associate Professor, Department of Industrial Engineering and Technology Management
Da-Yeh University, Taiwan

Prof. Vijaya Kumar Manupati
Associate Professor, Department of Mechanical and Building Sciences, Vellore Institute of Technology, India

Dr. Chiung Moon (co-chair)
Associate Professor, Department of Information & Industrial Engineering,
Yonsei University, Seoul, South Korea
Area Editor of the Journal of Industrial Engineering & Management Systems

Prof. Luis Ramos
Assistant Professor, Department of Industrial Engineering, Universidad Nacional Abierta, Venezuela

Dr. C.S.P.Rao
Associate Professor, Mechanical Engineering Department, National Institute of Technology, India

Prof. Susumu Saito
The Institute for Science of Labour, Japan
President, Japan Ergonomics Society

Prof. Lothar Schulze
Professor and Head of the Department of Planning and Controlling of Warehouse and Transport Systems (PSLT),
Leibniz Universitat Hannover, Germany

Prof. Norbert Sczygiol
Professor, the Czestochowa University of Technology, Poland

Dr. Rosemary R. Seva
Chair, Department of Industrial Engineering, De La Salle University, Philippines

Prof. Shaya Sheikh
Assistant Professor, Department of Quantitative Methods, New York Institute of Technology, New York

Prof. V. Soundararajan
Professor & Head, Department of Mechanical Engineering, Pondicherry Engineering College, India

Prof. Mincong Tang
Executive Director, International Centre for Informatics Research, Beijing Jiaotong University, China

Prof. Madjid Tavana (co-chair)
Professor, Department of Business Systems & Analytics, La Salle University, USA

Prof. Mihail Aurel Titu
Professor of Quality Management, Director of Intellectual Property Department, Lucian Blaga University of Sibiu, Romania

Dr. Ali Riza Yildiz
Researcher, Department of Mechanical Engineering, University of Michigan, USA

Dr. K.C. Winco Yung (co-chair)
Associate Professor, PhD
Centre-in-Charge, PCB Technology Center
Associate Director, AMT Research Center, Department of Industrial and Systems Engineering
The Hong Kong Polytechnic University, Hong Kong

Prof. Zeshui Xu
Professor, Business School, Sichuan University, China

ICINDE'18 Special session: Human Factors, Ergonomics, and Safety

Special session chair:

Dr. Alan Hoi-shou Chan
Associate Professor, Department of Systems Engineering and Engineering Management
City University of Hong Kong, Hong Kong

 

 
 

 

 

 
 
IAENG

EL

CSA

Meetings and Exhibitions Hong Kong

logo3

logo5

Springer

logo4

logo6