The 2013 International Conference of Mechanical Engineering
  London, U.K., 3-5 July, 2013
     
 
Conferences       Publications       Membership       About IAENG       FAQ       Contact Us
 
     
 
The 2013 International Conference of Mechanical Engineering (ICME'13) will take place in London, U.K., 3-5 July, 2013.
 
     
 

The conference ICME'13 is held under the World Congress on Engineering 2013. The WCE 2013 is organized by the International Association of Engineers (IAENG), and serves as good platforms for the engineering community members to meet with each other and to exchange ideas. The last IAENG conferences attracted more than one thousand participants from over 30 countries. All submitted papers will be under peer review and accepted papers will be published in the conference proceeding (ISBN: 978-988-19251-0-7). The abstracts will be indexed and available at major academic databases. The accepted papers will also be considered for publication in the special issues of the journal Engineering Letters, in IAENG journals and in edited books.

 
     
 
Calls for Manuscript Submissions
 
     
  Draft Paper Submission Deadline (extended): 23 March, 2013
Camera-Ready Papers Due & Registration Deadline (extended): 16 April, 2013 new
WCE 2013: 3-5 July, 2013
 
 

 

 

 
 
The topics of the ICME'13 include, but not limited to, the following:
 
     
 
 

Aerodynamics
Fluid Dynamics
Compressible Flows
Computational Mechanics
Biomechanics
Automotive Engineering
Heat and Mass Transfer
Nanomaterial Engineering
Plasticity Mechanics
Fracture
Geomechanics

Multibody Dynamics
Nonlinear Dynamics
Structural Dynamics
Vibrations
Acoustics
Noise Control
Material Engineering
Transport Phenomena
Manufacturing Process
Mechatronics
 
     
     
 
The ICME Program Committee
 
     
     
 
ICME Conference Committee
 
     
 

Dr Rehan Ahmed
Lecturer in mechanical engineering, Heriot-Watt University, School of Engineering & Physical Sciences, UK

Dr. R.K. AL-Dadah
Lecturer, Mechanical and Manufacturing Engineering Department,
School of Engineering, University of Birmingham, UK

Dr. Hafiz Muhammad Ali
Researcher, School of Engineering and Material Science, Queen Mary, University of London, UK

Dr. Carl Anthony
Research scientist, Department of Mechanical and Manufacturing Engineering, University of Birmingham, UK

Dr. Gaetano Burriesci
Lecturer, Department of Mechanical Engineering, University College London, UK

Professor Colin Bailey (FICE; co-chair)
Professor of Structural Engineering,
School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Dr. Alastair Cooke
Senior Lecturer, Dynamics, Simulation and Control Group, Department of Aerospace Sciences, School of Engineering, Cranfield University, UK

Dr. Rajarshi Das
Senior Lecturer, Department of Mechanical Engineering and Centre for Advanced Composite Materials, University of Auckland, New Zealand

Dr Daniele Dini (D. Phil. Oxford)
Lecturer of Mechanical Engineering (Tribology Group), Department of Mechanical Engineering
Imperial College London, UK

Professor Dimitris Drikakis (co-chair; FRAeS, FIoN)
Head of Aerospace Sciences Department
Chair of Fluid Mechanics and Computational Science
Cranfield University, School of Engineering, United Kingdom

Dr. John Durodola (FIMechE; co-chair)
Head of Mechanical Engineering Department, Reader in Stress Analysis and Materials,
Oxford Brookes University, UK

Dr. Taha M.S. Elhag
Lecturer and Director of Construction Management Programme, School of Mechanical, Aerospace & Civil Engineering,
Project Management Division, University of Manchester, UK

Dr Kamran Etebar
Principal Lecturer and Director of Undergraduate Programmes, Faculty of Engineering, Kingston University, UK

Prof. Graham H. Galbraith (co-chair)
Pro Vice-Chancellor International
Glasgow Caledonian University, UK

Dr Roy Garwood
Head of Engineering, Faculty of Advanced Technology, University of Glamorgan, UK

Professor Philip H Gaskell (co-chair)
Professor of Fluid Mechanics
School of Mechanical Enginnering, University of Leeds, UK

Dr Yakun Guo
Lecturer, Department of Engineering, University of Aberdeen, King's College, UK

Dr H Hadavinia
Senior Lecturer, Faculty of Engineering, Kingston University, UK

Dr. Y. Hardalupas (co-chair)
Reader in Multiphase Flows, Mechanical Engineering Department, Imperial College London, UK

Prof. Li He (Ph.D Cambridge; co-chair)
Professor and Chair of Thermodynamics and Fluid Mechanics, School of Engineering, Durham University, UK

Dr Khalid Hussain
Director of Studies in Mechanical & Automotive Engineering, School of Engineering, Design & Technology (EDT4), University of Bradford, UK

Prof. Ahmed Imran (Ph.D Oxford)
Assistant Professor, Department of Biomedical Engineering, Ajman University of Science & Technology, Ajman, UAE

Dr. Mohammad Jaffar
Lecturer, Loughborough University, UK

Professor Artur J. Jaworski
Chair in Engineering, Department of Engineering, University of Leicester, UK

Dr. Mohammed Khan
Associate Dean - International Programmes, School of Engineering, Design and Technology, University of Bradford, England

Dr Konstantinos Kontis (co-chair)
Senior Lecturer and Head of S.I. Group & Laboratory, School of MACE, University of Manchester, UK

Dr Tina Lekakou
Senior Lecturer, School of Engineering, University of Surrey, UK

Dr. Terese Lovas
Lecturer in Future Energy Conversion Technologies, Department of Engineering, Queen Mary, University of London;
College Lecturer in Engineering, Member of College Council, Churchill College, University of Cambridge, UK

Dr. Warren Manning
Lecturer, Engineering and Technology, Manchester Metropolitan University, UK

Professor Paul Maropoulos
Professor of Innovative Manufacturing, Director of the Global Digital Enterprise Research Laboratory,
Department of Mechanical Engineering, University of Bath, UK

Dr Samir Mekid
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Prof. Farhad Nabhani CSE, ME, MEEM, SBB co-chair
Professor - Biomechanics and Manufacturing, School of Science and Technology,
MSc Course Leader, University of Teesside, UK

Dr. Oluremi Olatunbosun
Senior Lecturer in Mechanical Engineering and Head, Vehicle Dynamics Laboratory,
Department of Mechanical and Manufacturing Engineering, The University of Birmingham, UK

Dr. Joshua R Omer
Research scientist, Division of Civil Engineering, Faculty of Advanced Technology, University of Glamorgan, United Kingdom

Prof. A. Alper Ozalp
Associate Professor of Mechanical Engineering, Engineering and Architecture Faculty, Uludag University, Turkey

Dr. Panagiota Pantazopoulou
Senior Consultant, Building Rersearch Establishment, Garston, Watford, United Kingdom

Dr. William K-S. Pao
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UNITED KINGDOM

Professor Philip D Prewett (DPhil Oxford, FInstP, FIoN, FRSA; co-chair & session chair (Microelectromechanical systems))
Lucas Professor of MicroEngineering and Nanotechnology, Former Joint Head of Department, Department of Mechanical Engineering and Manufacturing, University of Birmingham, UK

Dr. Muhammad Imran Rafiq
Lecturer in Civil Engineering Structures, School of Engineering, University of Surrey, UK

Dr. George F Rosala
Design Programme Director, School of Engineering, Design & Technology, University of Bradford, UK

Dr. M. Necip Sahinkaya
Reader in Mechanical Engineering, Department of Mechanical Engineering, University of Bath, U.K.

Dr. Stephen Samuel
Senior Lecturer in Mechanical/Automotive Engineering, School of Technology, Oxford Brookes University, UK

Prof. Lakmal Seneviratne (co-chair)
Professor of Mechatronics and Head of the Division of Engineering,
King's College London, UK

Dr. Evgeniy Shapiro
Lecturer, Fluid Mechanics and Computational Science Group, Cranfield University, School of Engineering, United Kingdom

Dr. Arezki Slaouti
Senior Lecturer in Thermofluids Engineering,
Department of Engineering and Technology, Manchester Metropolitan University, UK

Dr. John Sweeney
Reader in Polymer Mechanics, School of Engineering, Design and Technology, University of Bradford, UK

Dr. Chee-Keong Tan
Senior Lecturer, Department of Engineering, Faculty of Advanced Technology, University of Glamorgan, UK

Prof. Nakorn Tippayawong
Associate Professor, Department of Mechanical Engineering, Chiang Mai University, Thailand

Prof. Magd Abdel Wahab (co-chair)
Professor of Applied Mechanics, Department of Mechanical Construction and Production, Faculty of Engineering, Ghent University, Belgium

Prof Sergei V. Utyuzhnikov
Senior Research Fellow, School of Mechanical, Aerospace & Civil Engineering, University of Manchester, UK

Dr. Dmitry Vlasenko
Assistant professor , Otto-von-Guericke-University Magdeburg, Institute of Mobile Systems, Germany

Dr Yawei Wang
Senior Lecturer in Automotive Engineering, Faculty of Engineering, Kingston University, UK

Dr. Dongsheng Wen
Reader in Nanotechnology and Energy Engineering, School of Engineering and Materials Science, Queen Mary University of London, UK

Prof. Hongming Xu (DIC, CEng, FIMechE, FHEA; co-chair)
Professor of Energy and Automotive Engineering, Deputy Head of School of Mechanical Engineering, University of Birmingham, UK

 

 
  WCE Congress Co-chairs  
 

Prof. Alexander M. Korsunsky
Professor of Engineering Science
Dean, Trinity College
Department of Engineering Science, University of Oxford, UK

co-chair

 

Prof. Andrew Hunter
Professor & Head of Department
Head of Vision and AI Research Group,
Dean of Research,
Department of Computing and Informatics,
Lincoln University, UK

co-chair

 

Prof. David WL Hukins, CPhys, FinstP, FIPEM, FRSE
Professor of Bio-medical Engineering
Head of Department of Mechanical & Manufacturing Engineering,
University of Birmingham, UK

co-chair

 

Prof. Len Gelman (honorary co-chair)
Professor and Chair in Vibro-Acoustic Monitoring,
Chairman of the Condition Monitoring Technical Committee, the British Institute of NDT,
Director, Centre of Vibro-Acoustics and Fatigue,
Director, International Institute of Acoustics and Vibration (USA)
Cranfield University, UK

co-chair

 

Dr. Christopher John Hogger (honorary co-chair)
Senior Lecturer
Department of Computing
Imperial College London, UK

co-chair

 

Prof. Darek J. Ceglarek (ICMEEM honorary co-chair)
Professor, International Manufacturing Centre, University of Warwick, UK
Professor, Department of Industrial and Systems Engineering
The University of Wisconsin-Madison, USA
Fellow of CIRP; Associate Editor, IEEE Transactions on Automation Science and Engineering, and ASME Transactions on Manufacturing Science and Engineering

co-chair

 

Dr. Stephen Payne (ICSBB honorary co-chair)
University Lecturer in BioMedical Engineering
Dean of Degrees Keble College, Head of Physiological Understanding through Modelling, Monitoring and Analysis Group,
Department of Engineering Science, University of Oxford, UK

co-chair

 

 

 

 
     
 
iaeng
el
logo
YOURLONDON
logo
logo
VISITLONDON
logo5
logo6