The titles and contact authors of submitted papers that have been reviewed and accepted (or accepted with minor revisions) for WCE 2015 are listed here:
| Contact Authors | |
| A Comparative Review of Improvements in Long Term Evolution | Mrs. Oluyinka Oni |
| A Comparison Among Different Methods to Estimate Vehicle Sideslip Angle | Prof. Francesco Timpone |
| A Computational Analysis of Flow and Acoustics around a Car Wing Mirror | Dr. Aidan Bowes |
| A Conceptual Model for a Hybrid Knowledge-based Lean Six Sigma Maintenance System for Sustainable Buildings | Prof. Khurshid Khan, Mr. Jasim Al Dairi |
| A General Attribute Diffusion Mechanism on Social Networks | Mr. Frederick Kin Hing Phoa |
| A Hybrid Algorithm for Identifying and Categorizing Plagiarised Text Documents | Mr. VICTOR THOMPSON |
| A Machine Learning Predictive Model for the Jamaica Frontier Market | Miss Sherrene Bogle |
| A Model for the Evolution of Router Bandwidth Demand Using an Adaptive PID Controller | Prof. Asimakis Leros |
| A Modified ABC to Optimize the Parameters of Support Vector Machine for Predicting Bankruptcy | Mr. Yassine ABBAZI |
| A New Optimum Signal Compression Algorithm Based on Neural Networks for WSN | Dr. PRAYOTH KUMSAWAT |
| A Posteriori Error Estimator for a Front-Fixing Finite Difference Scheme for American Options | Prof. Riccardo Fazio |
| A Probabilistic Model of Periodic Condition Monitoring with Imperfect Inspections | Mr. Ahmed Raza, Prof. Vladimir Ulansky |
| A Realization of the Inverted Pendulum and Cart | Prof. Filomena Soares |
| A REVIEW OF THE TECHNOLOGY FOR GENERATING ELECTRICITY FROM MUNICIPAL WASTE | Mr. ENIOLA Victor Oluwasegun |
| A Seismic Isolation System for Lightweight Structures based on MRE Devices | Prof. Stefano Pagano |
| A Study of Unsteady MHD Vertical Flow of an Incompressible, Viscous, Electrically Conducting Fluid bounded by Two Non-conducting Plates in Presence of a Uniform inclined Magnetic Field | Dr. Krishna Gopal Singha |
| About the Impact Behaviour of Railway Fastening Systems | Dr. Giovanni Pio Pucillo |
| Adaptive Suspension of Vehicles with Ultra-wide Range of Control Performance | Dr. Sergei Aliukov |
| Aerodynamic Analysis of Blended Winglet for Low Speed Aircraft | Ms. Pooja Pragati |
| Air Spring and Magnetorheological Damper: an Integrated Solution for Vibration Control | Dr. Mario Terzo |
| Algorithmic Approaches and Embedded Architectures for Robotic Search and Rescue | Mr. Aleksander Milshteyn |
| An Agent Framework for Home Energy Management System | Dr. Visit Hirankitti |
| An ANOVA approach for the process parameters optimization of Al-Si alloy sand casting | Dr. Manjinder Bajwa |
| An efficient approach of power consumption in cloud using Scheduling of resources | Dr. Sunita gond |
| An Efficient Approach to Generate Clear Topologies of Structures Using Gradient-based Search Methods | Prof. Ting-Yu Chen |
| An Electron Microscopy Study of Sintering in Three Dental Porcelains | Dr. Alexander M. Korsunsky |
| An Enhanced Memory-Based Collaborative Filtering Approach for Context-Aware Recommendation | Dr. Wei-Po Lee |
| An Estimation of Single-Synchronized Krylov Subspace Methods with Hybrid Parallelization | Prof. SEIJI FUJINO |
| An Evolved Version of Thermo Racing Tyre for Real Time Applications | Prof. Francesco Timpone |
| An Example of Peak Finding in Univariate Data by Least Squares Approximation and Restrictions on the Signs of the First Differences | Prof. IOANNIS DEMETRIOU |
| An Explicit Method for Geometrically Nonlinear Dynamic Analysis of Spatial Beams | Prof. Kuo Mo Hsiao |
| An Initial Study of Single Gas Permeation using a Commercial Alumina Membrane | Mrs. Ifeyinwa Orakwe |
| AN INSIGHT TO ALGORITHMS FOR ADAPTIVE NOISE CANCELLATION | Dr. M.L.S.N.S Lakshmi |
| An Intelligent Approach for Cooling Radiator Fault Diagnosis Based on Infrared Thermal Image Processing | Dr. Hojjat AHmadi |
| An Investigation on Stiffness of the Temporomandibular Joint Under Cyclical Loading | Mr. Janith Paluwatta Muhandiramalage |
| An object-oriented framework for interoperability of industrial robots and CNC machines tools | Dr. Pouyan Jahanbin |
| Analysis Of Alternative Fuel Characteristics and Feasibility for Use in the Indian Cement Sector | Dr. Manoj kumar mishra |
| Analysis of an SEIR Epidemic Model with a General Feedback Vaccination Law | Dr. Manuel De la Sen |
| ANALYSIS OF DESIGN PARAMETERS DURING OPERATION OF A GLASS-FIBER WATER-FILTER TANK - A Case Study | Dr. Zainul Huda |
| ANALYSIS OF FRP COMPOSITE BALLISTIC HELMET UNDER HIGH SPEED IMPACT | Dr. J.Winston Jacob |
| Analysis of IEEE Harmonic Limits under Resonance Conditions | Mr. George Eduful |
| Analysis of Possible Ways of Power Distribution in an All-wheel Drive Vehicle | Dr. Sergei Aliukov |
| Analysis of Steel-Encased Composite Columns Subjected to Concentric Axial Load Using Artificial Neural Networks | Mr. Oscar Martinez Ramos |
| Analysis of Working Postures in Tire Production Sector by OWAS Method | Dr. Hatice Esen, Miss Tugcen Hatipoglu |
| Analytical Investigation of Swing Factor for Nanoscale Double Gate MOSFET Including Gate-work-function Effect | Prof. Faycal DJEFFAL |
| ANALYZING AND SURVEYING TRUST IN CLOUD COMPUTING ENVIRONMENT | Mr. Sudesh Kumari |
| Analyzing the Anterior Knee Laxity During Passive Flexion | Dr. Ahmed Imran |
| Aneesah: A Conversational Natural Language Interface to Databases | Mr. KHURIM SHABAZ |
| Anomalies Detection in Fuel Expense and Vehicles Mileage Through Data Mining | Kaleem Habib |
| Anti-Microbial Studies Using Sulphur Nano Particles on Dandruff Causing Malassezi Yeasts | Mr. Sudarsan Baskar |
| Approximation Methods Preserving Cones of Generalized Convex Functions | Dr. Sergei Sidorov |
| Artificial immune systems and missing features classification approach | Dr. Stefania Gallova |
| Assessing and Monitoring Student Participation in Engineering Laboratory using Radio Frequency Identification (RFID) - Satisfying ABET EC2000 Outcome 3b | Dr. PHILIPS OLALEYE AGBOOLA |
| Assessment of Biofuel Accident Risk: A Preliminary Study | Dr. Selva Soledad Rivera |
| Asymptotics for Singular Numbers of Resolvent Difference of Two Well-Defined Problems by Means of Correct Restrictions and Extentions | Dr. B. N. Biyarov |
| Asynchronous Sequential Symbol Synchronizers based on Pulse Comparison by Both Transitions at Quarter Bit Rate | Prof. Antonio Reis |
| Attitude Control and Angular Reorientations of Dual-Spin Spacecraft and Gyrostat-Satellites Using Chaotic Regimes Initiations | Dr. Anton Doroshin |
| Automated Test Data Generation: An algorithmic approach | Dr. Hitesh Tahbildar |
| Automatic Control of Cycling Effort Using Electric Bicycles and Mobile Devices | Prof. Jose Afonso |
| Autonomous Navigation of a Lego Robot with Neural Networks | Dr. Salvador Ibarra Martinez |
| Biodiesel Production over ZnO/TiO2 Catalyst: Effect of Co-solvent, Temperature and Reaction Time | Prof. KALALA JALAMA |
| Biofuel Sector as a Potential Business Opportunity for Emerging Cooperatives: A Case Study of South African Cooperatives | Dr. Sebonkile Thaba |
| Biohydrogen Production by Bacterial Granules Adapted to grow at Different Thermophilic Temperatures | Prof. Ayo Samuel Afolabi |
| Biomechanical Aspects of the Scapula-Glenoid Fixation in a Reverse Shoulder Implant | Dr.Nesreen Abulkhair |
| Boundary Element Analysis of Building Slabs | Prof. Joao Batista Paiva |
| Calculation of the Residual Stresses of Hollow Cylinder under Unsteady Thermal Action | Dr. Evgenii Murashkin |
| CFD Investigation of Micro Power Gas Turbine | Dr. Aleksandr Kartashev |
| Characterization of Functionally Graded Commercially Pure Titanium (CPTI) and Titanium Carbide (TiC) Powders | Prof. Esther T Akinlabi |
| Characterization of Sintered Boron Suboxide with Nickel Compounds | Dr. OLUWAGBENGA JOHNSON |
| CLUSTER ANALYSIS OF THE DISTRIBUTION AND PENETRATION OF PETROLEUM HYDROCARBONS IN CRUDE OIL SPILLED SOIL | Dr. Imeh Okop |
| CNTFET based Folded Cascode Operational Transconductance Amplifiers | Dr. Sajad A. Loan |
| Co-biodigestion With Grass: A Review | Prof. Esther T Akinlabi |
| Colocation Mining in Uncertain Data Sets: A Probabilistic Approach | Mrs. Sheshikala Martha |
| COMBUSTION AND HEAT TRANSFER ANALYSIS OF ENUGU SUB-BITUMINOUS COAL IN FLUIDIZED BED BOILER | Dr. Abdulkarim Nasir |
| Comparative Assessment of MRR, TWR and Surface Integrity in Rotary and Stationary Tool EDM for Machining AISI D3 Tool Steel | Mr. ANAND PRAKASH DWIVEDI |
| Complexity Reduction for Parametrized Catalytic Reaction Model | Dr. Saifon Chaturantabut |
| Complicating Factors in Healthcare Staff Scheduling Part 1: Case of Nurse Rostering | Mr. Michael Mutingi |
| Complicating Factors in Healthcare Staff Scheduling Part 2: Case of Nurse Re-rostering | Mr. Michael Mutingi |
| Composite Material Design for Rail Vehicle Innovative Lightweight Components | Dr. Salvatore Strano |
| Computer Aided Design Software Development for Expert System for Material and Welding Rod Selection in Robotic Welding | Dr. Adekunle Adefemi Adeyemi |
| Computer Based Power Plant Controller | Dr. RAJAN JACOB |
| Condition Monitoring of main Engine Journal-Bearing Using K-Nearest Neighbour, Artificial Neural Network and Support Vector Machine | Dr. Hojjat AHmadi |
| Congestion Control in Heterogeneous Wireless Ad hoc Network Using FRCC | Dr. M.Rajesh |
| Control of a New Swimming Microrobot Design Using Flatness-ANFIS-Based Approach | Mr. Mohamed Meguellati |
| Controlling an Equilibrist Lego Robot | Prof. Filomena Soares |
| Convex Surface Heat Transfer Behaviour in the Presence of Obliquely Impinging Non-Isothermal Slot Jets | Mr. Satyanand Abraham |
| Coprime Factorizability and Stabilizability of Plants by Adding Some Objects | Dr. Kazuyoshi Mori |
| Corrosion Behaviour of Mild Steel in Biodiesel Prepared from Ghee Butter | Prof. Ayo Samuel Afolabi |
| Cost-Benefit Analysis of Cyber-Security Systems | Dr. B K Alese |
| Czech Text Steganography Method by Selective Hiding Technique | Ms. Nujerlla Suresh Divya Shree |
| Data Mining Application in Credit Card Fraud Detection System | Dr. Francisca Ogwueleka |
| Data Warehouse Design Considerations for a Healthcare Business Intelligence System | Mr. Joseph George |
| Deep Drawing of Asymmetric Cups through Conical Die without Blank Holder | Prof. Mohsen AbdelNaeim Hassan Mohamed |
| Derivation and Validation of a Mathematical Model for a Novel Electric Bicycle | Dr. Mario Terzo |
| Design and Analysis of a Lightweight Disc-Type Magnetorheological Device | Dr. Yigit Tascioglu |
| Design and Analysis of Modified Front Double Wishbone Suspension for a Three Wheel Hybrid Vehicle | Mr. Sarvadnya Thakare |
| Design and Construction of a Manual Jatropha Oil Expeller | Dr. ODUSOTE |
| Design and Microwave Analysis of Slot Antenna Configurations for Hepatic Tumor Manag | Dr. Engr. Junaid Zafar |
| Design and Motion Study of a Wheelchair for Disabled People | Dr. Ionut Daniel Geonea |
| Design of Composite Sandwich Shock Absorber Mounting for an Innovative Rail Vehicle End | Dr. Salvatore Strano |
| Design of Low Jitter PLL for Serializer/Deserializer Transmitter | Prof. Lili He |
| Design the Geographical Information System for Supplier Selection in Batik Industry | Dr. Aries Susanty |
| Detecting the Position and Number of Sharks in the Sea Using Active Sound Navigation and Ranging (SONAR) Technique | Mrs. Hauwa Abdulkarim |
| Detection of Oil Production Abnormalities in a Cluster of Wells System Using Fuzzy Support Vector Machines | Mr. Timothy Odedele |
| Determination of the Stress and Resistivity of Stainless Steel Foams | Prof. Ahmed Telba |
| Developing a Method with an Experimental Study for Estimating Vehicle Speed and Slip using Kalman Filter and Fuzzy Rules | Mr. Ali Momeni |
| Developing and managing requirements: How much progress has been made? | Dr. Prof. Edgar Serna M. |
| Developing Two Novel Lagrange-based Algorithms for Direct Calculation of Interpolating Polynomial Coefficients | Mr. Ali Momeni |
| Development of a Motorized Yam Pounding Machine Design to Improve Standard of Living for Sustainable Economic Development in Nigeria | Mr. GBASOUZOR AUSTIN IKECHUKWU |
| Development of Artificial Foot of Active Transfemoral Prosthesis System using Topology Optimization | Mr. Kwang-Hee Lee |
| Development of Autonomous Maintenance in a Furniture Company | Prof. ISABEL LOPES |
| Development of New Services in Financial Entities in Northern Peru | Prof. Eduardo Sanchez Ruiz |
| DIBL and Subthreshold Swing Effect on Carbon Nanotube Field Effect Transistor | Prof. AHM ZAHIRUL ALAM |
| Disassembly Process Planning for Remanufacturing and Sequence Generation for a Mechanical Device | Dr Simolowo O. E |
| Distributed Machine Learning Based Biocloud Prototype | Dr. Shuchi Sethi |
| Dropped Ball Travel Time using Variation and Integration | Dr. Dieudonne NDONG OVONO |
| Dynamic Modeling of a Multiple Launch Rocket System | Mr. Serdar SERT |
| Dynamic Tests on Ring Shear Apparatus | Prof. Stefano Pagano |
| Dynamics of Tethered Space Debris with Fuel | Prof. Vladimir Aslanov |