The titles and contact authors of submitted papers that have been reviewed and accepted (or accepted with minor revisions) for WCE 2018 are listed here:
| Contact Authors | |
| Early Software Defect Prediction Using Top Ranked Metrics of SDLC | Dr. Chandan Kumar Jha |
| Effect in Performance and Emission of Jatropha Biodiesel Added with DEE Fuelled in Electric Generator | Dr. INDRAJ SINGH |
| Effect of Feed Rate and Constant D.O.P. by Burnishing Process on Non-Ferrous Metals | Prof. Sivaprakasam Thamizhmanii |
| Effect of High Temperature to Output Power of Solar Cell | Prof. Ahmed Telba |
| Effect of Pipe Materials on BLE using Graph-Based Integrated Hydraulic Model | Mr. Kazeem Adedeji |
| Effect of Training Set Size in Decision Tree Construction by using GATree and J48 Algorithm | Dr. NAMDEO KALYANKAR |
| Effect of Weld Pool Vibration on Fatigue Strength and Tensile Strength of Stainless Steel Butt Welded Joints by GTAW Process | Dr. Jaspal Singh Gill |
| Effective Trading in Turkish Electricity Market: Hedging with Options | Dr. A.Cagri Tolga |
| Effects of electromagnetic field intensity on gas metal welding arc in stainless steel cladding overlays | Dr. Jaspal Singh.Gill |
| Effects of Process Parameters on Vibration Frequency in Turning Operations of Perspex Material | Mrs. Imhade Okokpujie |
| Embeddings Between Circulant Networks and Hypertrees | Dr. JAGADEESH KUMAR KOLLI |
| Emergency Waiting Times Data Analysis | Dr. Ruben Pereira |
| Enhanced Random Access MAC Protocols for Multi-Hop Cognitive Radio Network | Dr. Mulugeta Atlabachew |
| Enhancing Structural Health Monitoring by FEM and Laser Doppler Vibrometry | Prof. Alfayo Anyika Alugongo |
| Enterprise End-point Device Management | Dr. William Simpson |
| ERGONOMIC EVALUATION FOR THE IMPLEMENTATION OF A PROGRAMME OF ERGONOMIC MANAGEMENT IN A CARNICAL PROCESSES PLANT | Dr. OBED RICARDO MADRID ZAYAS |
| ERGONOMIC EVALUATION FORTHE IMPLEMENTATION OF A PROGRAMME OF ERGONOMIC MANAGEMENT IN A CARNICAL PROCESSES PLANT | Dr. OBED RICARDO MADRID ZAYAS |
| Estimation of Geoclimatic Factor for Nigeria through Meteorological Data | Dr. Ilesanmi Banjo Oluwafemi |
| Estimation of Human Error using Fuzzy Relation | Dr. L. Swaanika |
| Evaluating Healthcare Governance using Knowledge-Based System to Enhance Quality Management | Mr. Yousuf Al Khamisi |
| Exact Solutions of Some Complex Non-Linear Equations | Dr. Sachin Kumar |
| Experimental Investigation into the Effects of Al-composite Nanolubricants on the Energy and Exergy Performance of Vapour Compression Refrigerator Compressor | Prof. Oluseyi Ajayi |
| Experimental Investigation of Machining Depth and Diametric Cut of Mosaic Ceramic by using Electrochemical Discharge Drilling Process | Dr Amaresh kumar |
| Experimental Investigation of the Ground Coupled Heat Exchanger System under the Climatic Conditions of Sahiwal, Pakistan | Dr. Hafiz Muhammad Ali |
| Experimental investigations and selection of solid lubricant assisted lubrication strategy in machining | Dr. Mayur Makhesana |
| Experimental Simulation Comparison of Delay Spread, Path Loss Analysis for Indoor Environment | Dr. Mila Sobetwa |
| Experimental Study about the Applicability of Traffic-induced Vibration for Bridge Monitoring | Dr. Kyosuke Yamamoto |
| Experimental Study of Flow Boiling Heat Transfer in Spider Netted Microchannel for Chip Cooling | Prof. Pingan Du |
| Extracting Clinical Knowledge from Electronic Medical Records | Dr. Joao Carlos Ferreira |
| Fatigue Life Prediction for Supersonic Aircraft Skin Panels Subjected to Acoustic Loading | Mr. Eun-Su Go |
| FC-TBSR Compensator for Reactive Power Compensation and Voltage Swell Mitigation | Mr. Swapnil Patil |
| Ferromagnetic Liquid Flow due to Inclined Stretching of an Elastic Sheet | Dr. Annamma Abraham |
| Finite Element Modelling and Analyses of Square Steel Plate subjected to Shear Load | Dr. Muhammad Aslam Bhutto |
| Forming Analysis for the Thickness and Diameter of the Bent Pipe Decreases Prediction | Mr. Seong-hun Ha |
| Friction Stir Welding of Dissimilar AA6063/Al Joint | Dr. Rahul Chhibber |
| Frost Measurement Methods for Demand Defrost Control Systems: A Review | Mr. Martim Aguiar |
| Fuel Vapor Lock Phenomenon on Gasoline Fueled Internal Combustion Engines | Dr. Taimur Ali Shams |
| Fuzzy Cognitive Maps and Induced Fuzzy Cognitive Maps approach to Traffic flow | Dr. R.Sujatha |
| Gathering Effect of Interacting Agents on Stock Market Price: Econophysic Modeling via Agent-based Monte Carlo Simulation | Dr. Yongyut Laosiritaworn |
| HALL CURRENT EFFECT ON ENTROPY GENERATION OF POISEUILLE FLOW | Dr. Abiodun Opanuga |
| HALL CURRENT EFFECT ON THE ENTROPY GENERATION OF NATURAL CONVECTION FLOW OF COUPLE STRESS FLUID | Dr. Abiodun Opanuga |
| High-Gain Microstrip-Antenna Design Using Sub-Array Method | Prof. Adit Kurniawan |
| Historical Review of Topological or Differential Invariants and Application to Engineering Sciences and Physics | Prof. Durand Philippe |
| Hybrid control approach using NLMS and PLMS algorithms for grid connected SPV system | Dr. MOHAMMAD RIZWAN |
| ICMetrics based Industrial Internet of Things (IIoT) Security in the Post Quantum World | Mrs. Ruhma Tahir |
| Identification of Feeders Prone to Failure in the Nigerian Power System Network | Dr. Abel Airoboman |
| IDENTIFICATION OF OBSTACLES IN IMPLEMENTATION OF TOTAL QUALITY MANAGEMENT (TQM) IN BUILDING CONSTRUCTION INDUSTRY IN INDIA -AN EMPIRICAL STUDY | Dr. Gupta Suresh Kumar |
| Identifying High PPI Clusters by Integrating Data and Knowledge Sources | Dr. Wei-Po Lee |
| Improving Hebron Drinks Company Value through Optimization of Production Processes using Operations Research Model | Dr. Michael Agarana |
| INBUILT STREET LIGHTING SYSTEM WITHOUT EXTERNAL POWER USAGE | Dr. M.R. Sundara Kumar |
| Industry 4.0: An Overview | Dr. Beatrice Paiva Santos |
| Influence of AA-GTA welding on the weld metal penetration | Dr. Sameer Khan |
| Influence of Hall Current on Third Grade Fluid with Entropy Generation | Dr. Abiodun Opanuga |
| Innovative Computational Advances for Disease Outbreaks | Dr. Kidane Desta G |
| Innovative Methods in Control of Processes and Algorithms of their Implementation | Dr. Sergei Aliukov |
| Integrated DLM-COPRAS Method in Materials Selection of Laminated Glass Interlayer for a Fuel-Efficient Concept Vehicle | Mr. Mark Vincent Manalo |
| Introducing the Kumaraswamy Perks Distribution | Dr. Pelumi Oguntunde |
| Investigation of the Effect of Varying Silicon Die Size and Thickness on a Small Outline Transistor on the Silicon Die Crack Using Finite Element Method | Ms. Hannah Erika Ducusin |
| Investigation of the Fly Ash - Beta Cyclodextrin Composite on Concrete's Durability Indexes | Prof. Bolanle Ikotun |
| Kinetic Modelling for Tar Evolution and Formation in a Downdraft Gasifier | Mr. Ahmed Salem |
| Knowledge Based Decision Support System for GSC Industries Benchmarking Perspective | Ms. Makhala Mpho Motebele |
| Knowledge Grid System: A Platform for Collaboration and Knowledge Sharing among Nigerian Universities | Dr. Boluwaji Akinnuwesi |
| Laplace Distribution: Ordinary Differential Equations | Dr. Hilary Okagbue |
| Layout as a Determinant Factor in the Efficiency of Industrial Manufacturing | Dr. Beatrice Paiva Santos |
| Machine Learning-based Methods for Detecting Defects in Glass Substrate from Non-contact Electrical Sensor Data | Prof. Hideki Katagiri, Mr. Ryota Wakamatsu |
| Marshall-Olkin-Nadarajah-Haghighi Distribution: Ordinary Differential Equations | Dr. Hilary Okagbue |
| Measurement Model and Use of Electrical Energy Recovered from the Flow of Drinking Water from the Home Network of a House in Guayaquil City | Dr. Ronald Alberto Ponguillo Intriago |
| Mechanical Modelling of AM Processes for Centrifugal Deposition of Viscoelastic Material Layers on a Cylindrical Mold | Dr. Dmitry Parshin |
| Microfinance as an Instrument for Economic Empowerment of the Poor People in Sri Lanka | Mr. J. Krishanthi Mallika |
| Micro-Finishing of EDM-Implant and Its Effect on Formation of Oxide Layer and Wettability | Dr. Nanang Qosim |
| Mobile Treatment for Epileptic Seizures Using Little Scale Electronic Sensors | Sir/Madam |
| Modeling of 6-Phase Induction Machine Including Stator Slots Effect | Dr. Yazid kaikaa |
| Modelling of Renewable Resource Systems with an Analysis of Changes of the Individual Parameter | Prof. Oleksandr Karelin |
| Modified Burr III Distribution: Ordinary Differential Equations | Dr. Hilary Okagbue |
| Modified Weibull Distribution: Ordinary Differential Equations | Dr. Hilary Okagbue |
| Multi Objective Optimization of Material Removal Rate and Tool Wear Rate in EDM Machining of Metal Matrix Composite using Firefly Algorithm | Dr. Murali Krishna Chimata |
| Multiple Jet Impingement in Reflow Soldering -a Numerical Approach | Miss FLAVIA BARBOSA |
| MULTIPLIED BEST PROXIMITY POINTS FOR GENERALIZED CYCLIC -CONTRACTIONS | Dr. Johnson Olaleru |
| Multiprocessing Suited Pace Size Proficiency for Ciphering First Order ODEs | Dr. Jimevwo Godwin Oghonyon |
| Non-Conservative Stability Analysis of Hauger Types of Columns with Different Boundary Conditions | Prof. S. Ahmad Fazelzadeh |
| Numerical Analysis of a Family of Second Order Time Stepping Methods for Boussinesq Equations | Miss Medine Demir |
| Numerical analysis of laser induced combustion of methane air mixture in a constant volume combustion chamber | Dr. Sanket Mulye |
| Numerical Analysis of LM MHD Flows in Splitting Ducts under a Uniform Magnetic Field | Miss YANG LUO |
| Numerical and Experimental Assessment of the Performance of Wearable Airbags for Motorcycle Riders | Mr. Edoardo Marconi |
| Numerical resolution of turbulence transport equations in a non-stationary incompressible anisotropic fluid in a pipe with a negligible slope | Dr. Ali Fourar |
| Numerical resolution of turbulence transport equations in a non-stationary incompressible anisotropic fluid in a pipe with a negligible slope | Dr. Ali Fourar |
| NUMERICAL SIMULATION OF NATURAL CONVECTION IN SOLAR CHIMNEY POWER PLANT | Dr. Hadjer Bahache |
| Numerical Solution to Strong Cylindrical Shock Wave in the Presence of Magnetic Field | Dr. ADDEPALLI RAMU |